Coude Male Brass

Mahsulot haqida ma'lumot:

Ushbu Coude Male Brass - IFAN ostidagi quvur moslamasi. Uning bir uchi quvur armatura bo'lib, uni PEX trubkasi bilan ulash mumkin; ikkinchi uchi esa bir xil o'lchamdagi tishli armatura bilan bevosita bog'lanishi mumkin bo'lgan ayol tishli armaturadir.

Coude Male Brass - mustahkam armatura va biz barqaror quvur moslamasini qidirayotganimizda, Coude Male Brass ajoyib tanlov edi: u katta quvvatga ega, PEX quvur tizimlari uchun juda mos keladigan darajada kuchli va ishonchli.

Coude Male Brass o'rnatish jarayoni: O'rnatishning eng oson usuli bu Brass PEX quvur fittingidir, sizga faqat kichik asbob kerak va uni osongina bajarishingiz mumkin.

Mahsulot hajmi:

Mahsulot xususiyatlari:

In the process of using the ferrule joint, its sealing is a very important performance. We need to do the sealing installation during installation. So how can the sealing installation of the ferrule joint be carried out? Let's take a look at the relevant instructions:

In order to ensure the installation and sealing of the ferrule joint, first cut off the seamless steel pipe of appropriate length with a saw blade, remove the port burr, and insert the nut and fastener on the seamless steel pipe; pay attention to the direction of the nut and bite, do not install it in reverse, Apply lubricating oil to the screws and ferrules of the pre-assembled joint body, insert the steel pipe into the joint body, and tighten the nut by hand; tighten the nut until the fermenter steel pipe is caught by the fermentor. This turning point can be felt by the increase in tightening torque. to; when the pressure point is reached, tighten the nut 1/2 turn, remove the pre-assembled fitting body, and check the insertion of the cutting edge of the ferrule, the visible protruding band must fill the space at the front of the ferrule, it can turn slightly, but Can not move axially; in the next installation, the thread of the joint body should be lubricated with lubricating oil, and the compression nut should be screwed together until you feel the tightening force increase, and then tighten the ferrule joint 1/2 turn, complete Install.